CPVC stands for chlorinated polyvinyl chloride, a plastic that can safely carry both hot and cold water. CPVC pipes resist corrosion and scaling, join quickly with solvent cement and are widely used for water supply inside homes and buildings. GL Construction & Interior Work supplies CPVC pipes and fittings in Delhi NCR in all common sizes and pressure classes.
Old GI pipes rust from the inside, reduce water pressure and stain water over time. CPVC pipes are the modern replacement. They stay smooth inside for years, keep water clean and handle geyser hot water without trouble.
Why Choose CPVC Pipes?
Hot and Cold Water
CPVC is designed to carry hot water from geysers and solar heaters as well as cold water, within its rated temperature and pressure.
No Rust or Scaling
The inner surface stays smooth, which keeps water flow steady and water quality good.
Easy, Strong Joints
Solvent cement welding creates joints that are stronger than the pipe itself when done correctly.
Long Life
Good quality CPVC systems are designed to last for decades with minimal maintenance.
Which CPVC Pipes and Fittings Do We Stock?
Pipes
SDR 11 Pipes
Thicker walls and higher pressure rating, commonly used for hot water lines and high rise buildings.
SDR 13.5 Pipes
Slightly thinner walls, commonly used for cold water lines and lower pressure applications.
Fittings
- Elbows, tees, couplers and reducers
- Brass threaded elbows and tees for taps and mixers
- Ball valves and concealed valves
- End caps, unions and transition fittings
- CPVC solvent cement and cleaners
CPVC Pipe Sizes
| Nominal size | Common use |
|---|---|
| 15 mm (half inch) | Taps and fixtures |
| 20 mm (three quarter inch) | Bathroom and kitchen branches |
| 25 mm (one inch) | Main distribution lines |
| 32 mm and above | Risers and large buildings |
How to Install CPVC Correctly
- Cut the pipe square with a proper cutter
- Remove burrs and chamfer the edge
- Apply CPVC solvent cement to pipe and fitting
- Push together with a quarter turn and hold briefly
- Allow curing time before pressure testing
Common Mistakes to Avoid
- Using UPVC solvent cement on CPVC pipes
- Not allowing enough curing time
- Over tightening threaded brass fittings
- Exposing pipes to direct sunlight without protection
CPVC vs Other Pipes
CPVC is excellent for indoor hot and cold water. For cold water tanks and outdoor lines, many plumbers prefer UPVC pipes. For heat fused joints, consider PPR pipes. See our full plumbing pipes and fittings range, and finish with quality CP fittings.